You probably know something about the quarry diamond wire saw. Maybe you've been using the diamond wire rope saw cutting all the time, but do you know what you should pay attention to when using the diamond cable wire saw? Read this and you'll probably know something about the attention to the use of the diamond wire saw cutting machine.

The quarry wire rope saw is mainly used for cutting stone mining working face of the integer decomposition and blocks. The diamond wire saw is the most advanced mining equipment in currently the world's stone mining level, vertical and inclined cutting. At the same time, the quarry diamond wire saw can be used for city buildings, bridges and other buildings, the demolition of separation and so on.

First, the electric conditions must be suitable for the needs of the granite diamond cable saw. Generally, you need to provide three-phase power supply 380 + 10%V cable and provide sufficient length according to the actual situation of the site for the diamond wire for marble. At the same time, you need to prepare enough cooling water and space land before you use the granite diamond wire saw cutting. Before you use the diamond rope cutting, you need to think about other equipment such as the crane and so on.

Wire saw installation also plays a very important role in the all affection, you need to confirm before the direction of the diamond cutting wire saw to ensure that the arrow direction of the diamond rope cutting is the same with the cutting direction. What you need to pay attention to is that when you cut the vertical plane, the running direction of diamond cutting wire must be entered along the horizontal hole that goes out from the vertical hole. The marble diamond cutting wire from old to new, running direction should be consistent. If some parts are wrong, the whole diamond wire saw will be scrapped. You can't put the new ropes and the old ropes together, this will cause a lot of waste, will also cause the card rope and the rope breaking accident.

When you get through the diamond wire saw’s main power of the supply, be sure to shut off the power supply. In the adjustment of the position and direction of the flywheel drive, you must see no obstacle around the marble wire saw rope to not encounter the other parts of the diamond wire saw machine. The cooling water supply should always be checked when you use the diamond rope cutting, once the cooling water supply is not in place , you should immediately stop cutting to avoid the damage of the quarry wire rope saw. Don't open phase wire in power when sawing operation. If you are not professional, do not modify the parameters of the quarry wire rope saw that have been set in the inverter

When you use the diamond cutting wire, you must be very careful to prevent accidents and be careful to use the diamond wire saw stone cutting is also very important for the maintenance of the diamond rope cutting for rock. The attention in this article is not comprehensive enough, in the process of using you, you have to learn more.